Herriman Backyard Goes From Bare Dirt to Fresh Sod and Sprinklers

Here's what we started with - two backyards that were nothing but dirt, rocks, scattered weeds, and spray-painted layout lines on the ground. No grass, no water source, no infrastructure. Just raw earth that needed everything built from scratch. That's actually our favorite kind of starting point, because we get to do it right from the beginning.

The first thing we tackled was the irrigation. Before a single piece of sod ever hits the ground, the sprinkler system has to be in place and dialed in. We installed a full underground system with a properly piped backflow preventer mounted to the exterior of the house, and wired valve boxes set into the ground. Clean installs, solid connections, nothing sloppy. Getting this part right is what determines whether your lawn thrives or struggles long-term.

Next came grading. This step gets skipped or rushed more often than it should be. We took the time to prep and level the soil so water drains correctly and the sod has a firm, even base to root into. Skip this step and you end up with low spots that pool water and high spots that dry out - both are a headache down the road.

Then we laid the sod. You can see the tight, consistent layout across both yards - rows fit together cleanly with no gaps or bunching. Once everything was down, we ran the system and let it do its job. The sprinklers came up evenly across the lawn, hitting good coverage from edge to edge. That's what a properly designed system looks like when it runs.

Two backyards. New sprinkler systems, proper grading, and a full sod install at both. The yards that were bare dirt are now green, watered, and set up to root in strong. If your yard is in a similar spot and needs a real fresh start, this is exactly the kind of work we do.